1.5m CAT6A Patch Cable Grey 10GBase-T
A 1.5m Cat6A lead for 10 Gigabit Ethernet, rated to 600MHz and backwards compatible with Cat6, Cat5e and Cat5 equipment. Use it for 10G switches, servers and NAS storage, or anywhere you want room for faster equipment later.
Each pair is wrapped in foil inside an overall screen (S/FTP), which keeps out interference from power cables and other leads. Screening works best when the switch and patch panel are screened too. The LSZH (low smoke zero halogen) sheath gives off little smoke and no halogen gas in a fire, which is why it is often asked for in offices, schools and public buildings.
Snagless boots protect the RJ45 latch from catching or snapping off when the lead is pulled through a cabinet. The flush moulded ends are slim enough to sit side by side in busy switch ports. 1.5m suits short connections such as a router to a modem or switch on the same desk, or patching between neighbouring rack units. Grey is the usual colour for general patching and blends into most cabinets.
- Category: Cat6A, 600MHz
- Speed: up to 10 Gigabit (10GBASE-T)
- Length: 1.5m
- Colour: Grey
- Screening: S/FTP
- Sheath: LSZH
- Conductors: pure copper
- Connectors: RJ45 male to RJ45 male, snagless
- Tested to ISO/IEC 11801 Ed.2 and ANSI/TIA-568-C.2
- Fire test: IEC 60332-1-2
- RoHS compliant, 3P verified