|
|
sata power data cable
Browse our complete selection of sata power data cables. Available for immediate dispatch, these are designed for both home setups and commercial environments.
|
 |
|
 |
| Displaying 1 to 5 (of 5 products) |
Result Pages: 1 |
| |
| |
|
|
|
|
Buy Now |
 |
2.5" IDE/SATA External HDD Enclosure • The CDLSB-803 is a HDD enclosure for laptops 2.5” SATA / IDE hard drives. This product connects to a PC or laptop via USB 2.0/eSATA. The CDLSB-803 is a quick and easy way to connect your 2.5” SATA / IDE hard drives externally to read, copy and edit data from one hard drive to another.Specification: Supports 2.5” IDE/SATA HDD
• Supports Mini USB 2.0/eSATA
• Supports High capacity drives
|
£20.59 |
CDLSB-803 |
0 |
Out of Stock |
 |
3.5" IDE or SATA Hard Disk Drive USB 2.0 Enclosure • The NL-HD07 Newlink Enclosure supports IDE or SATA Hard Drives and connects via the High Speed connection of USB 2.0 with data transfer rates of up to 480 Mbps. It is made from a durable aluminium which aids heat dissipation of the Hard Drive. Specification Compliant with USB Specification Revision 2.0 (Supported Data Rates: 1.5 Mbps Low Speed, 12 Mbps Full Speed...
• Connects to a computer using a A-B USB Data Cable
• Supports Standard 3.5 Inch IDE/EIDE or SATA Desktop Hard Disk Drives
|
£15.43 |
NL-HD07A |
0 |
Out of Stock |
 |
50cm Serial Ata Combo Power & Data Cable • Serial ATA combo power & data cable, male 4 pin molex to 15 pin SATA power female connector, female 7 pin data cable. >Specification> SATA Revision 2, 3GB/S>
• 7 Pin Female SATA Data
• 15 Pin Female SATA Power>
|
£2.16 |
88RB-416 |
283 |
Add to Cart |
 |
Bi-directional SATA to IDE Adapter • The NL-SATADUALADAPT is a bi-directional converter for serial and Parallel ATA translation. The Serial ATA physical, link, and transport layers are compliant to serial ATA 1.0. The NL-SATADUALADAPT converter supports a 1.5GHz data rate. The application layer supports both the ATA register command set and packet command set, which could drive both hard disk drive and ATAPI optical storage such as CR-ROM, CD-RW, DVD-ROM, DVD-RW, etc. The Serial ATA and the Parallel ATA application layer support both host and device operation. Easy to install and setup, simply connect devices and slide switch to correct position. The switch works by selecting which mode the IDE connector is to be used. If converting a SATA device to IDE choose HOST and when converting IDE device to SATA select DEVICE.Specification Serial ATA 1.0 specification 1.5Gbps
• ATA/ATAPI PIO mode 0 – 4
• ATA/ATAPI Ultra DMA 16.7, 25, 33, 48, 66, 100, 133 & 150Mb/s
|
£14.76 |
NL-SATADUALADAPT |
0 |
Out of Stock |
| |
Serial ATA Combo Power & Data Cable • Serial ATA combo power & data cable, male 4 pin molex to 15 pin SATA power female connector, female 7 pin data cable. >Specification> SATA Revision 2, 3GB/S>
• 7 Pin Female SATA Data
• 15 Pin Female SATA Power>
|
£0.72 |
RB-416 |
3589 |
Add to Cart |
|
Choosing the right Sata Power Data CableWhen selecting a sata power data cable, check your bandwidth and shielding requirements. Unshielded cables work well for standard applications, while shielded options protect against interference in complex environments. All of our sata power data cables are built to strict industry standards.
|
|
|
|
|
|
|
|
|
|
|
